How to enter my Unlock Code on Huawei ?

Model: New Huawei Model

1. Turn on your mobile with a SIM card not accepted,
2. Your mobile shows you NCK or SOS or Power,
3. Select NCK on, and enter your Unlock Code,
4. Confirm with OK.

Model: Old Huawei Model (Before 2011)

1) open Hyperterminal : C:Program FilesWindows NT (should be there)
2) you must set com port on modem (Huawei Mobile Connect - 3G Modem)
3) type following command : AT^CARDLOCK="<you unlock code>"
4) Validate by pressing Enter.

Model: Huawei Ascend G300

Just insert the new Sim card you wish to use,( or any other network Sim other than what it is locked too ),the phone will then tell you it is Sim locked and ask if you want to unlock. Screen will show unlock code line press this then insert code. Phone is now permanently Sim unlocked .

Model: Mini WIFI Modem

1 Insert Non-Optus SIM card into modem
2 Power device on – wait until the device has completed it’s initialization
3 Make sure there is a connection between the WiFi Modem and the client (eg computer)
4 Start an Internet browser and enterhttp://192.168.1.1 in the address bar. (The default password is admin).
5 Enter the password, and then click Login
6 Select Settings
7 Select Dialup and then Unlock SIM
8 Enter unlock code and then click Apply
9 Unit resets itself if successful.

Model: Huawei E372

Connect your HUAWEI E372 to a computer with a non accepted SIM card,
Install and run MobilePartner application,
You will se a window with a massage: "Please enter unlock code:",
Enter the code we send to you and accept it,
Your modem is now unlocked.

Model: Huawei E5372T Router

step 1. make sure your router charged
step 2 . change sim card and turn on router ( different network sim )
step 3. now the device display invalid sim or any other sim not support messages , dont worry move next
step 4. now Establishment the wifi and connect to computer or your phone /tab
step 5. now just navigate to open browser > enter the your default ip address ( 192.168.1.1 Or 192.168.8.1 )
step 6. now just login with username : admin , password : admin
step 7. now its the simple prompt box asking u enter unlock unlock code with a small box , Now enter your unlock code and click apply

if not prompt unlock code asking box > move to step 8

step 8. just navigate after login > Go to Advanced Settings – SIM Settings - Unlock Device – Enter the unlock code and Click on Apply.
step 9. after entering correct unlock code , your router redirect to home page and displaying u new networks signal >

Congratulation ! You successfully unlocked your device and ready to use all over world all networks
and just now u can create a new profile settings with APN address and surf internet !